Colorunion printing cartridge, Make your life more colorful

Printing experts: laser drum unit easily cope with selenium drum common faults

by:Colorunion     2020-09-10
unit at the beginning of the purchase, there will be a lot of things need to learn, we often just because some special operation, can let a drum scrap in vain, today we bring you drum unit installation and operation of 17 recommendations, including problems of processing, want to buy new laser selenium drum and the drum unit installation and maintenance of the help.


1, the seal to pull out, are generally poor assembly, seal fold screens or clamp the carbon powder.


2, leakage powder: besides poor seal seal leakage before printing powder, powder compact in multiple components or parts will cause leakage powder in use process, magnetic roller seal felt defect, the powder knife aging, magnetic roller blade deformation and paste not firm seal, seal defect or aging sponge, cleaning doctor blade deformation, paste the rickety can cause leakage powder, etc. 。


3, print out the whole white or light and fuzzy


A, seal not away


B, compact seal before shaking, the powder is not smooth.


C, laser is not according to the drum, powder compact mask does not open, a toner cartridge cover is not open.


D, bad earth drum, drum in conducting strip or cartridges are connected to the machine electrical contact point contact undesirable.


4, print all black is usually the problem of electricity:


A, bad packing charge roller or assembled.


B, conductive charging roller bracket deformation or poor contact.


5, vertical black line: refers to the perpendicular line from on to the next why don't you need, may be thick or thin lines, continuous or intermittent. Thin light color on the vertical line is generally produced or toner cartridge cleaning blade gap with a circle cut. Coarse and intermittent black line and edge is not clear, is often sealing blade crease or powder knife aging.


6, the black version of the vertical lines on the white line, the depth of the photosensitive drum wear line, magnetic roller has caused the impurities or magnetic roller coating wear line.


7, horizontal error: refers to the printing on the transverse of intermittent printing not, reason:


A local exposure, drum coating;


B, drum drive gear defect, loose or tooth defect;


C, magnetic roller coating defects;


D, core breaking or location error;


E, magnetic roll sheath serious wear or deformation;


F, magnetic roller conductive spring poor contact or beating.


8, horizontal black line: is the problem of electricity commonly, periodic horizontal black line often is charging roller coating defect and a sense of drum coating on * *. Irregular level of fine black line often is united in wedlock is powder warehouse or waste powder warehouse does not reach the designated position.


9, periodic blur: often a drum or a charging roller coating pollution caused, watermark, mimeograph, finger print often caused the defect.


10, the grape bunches, is like a coin overlap appeared on the printing of a defect, no rules, and difficult to repeat, is a drum to poor grounding.


11, scattering background: refers to the text or lines do not need around the small black dot, caused by magnetic roller coating or toner. Photosensitive drum overheating ( A high sensitivity) Also can cause the defect.



12, print background ( The tiger spot) : with black wavy appeared on the white board or take the form of white on the black version or half color format. Usually magnetic roller set of coating defects or due to the low density for a long time printing, magnetic powder binder on the magnetic roller set.


13, hollow words: refers to the stroke on the text or image lacks,


the reason: A, carbon powder problem in itself. B, drum powder with bad. C, magnetic roller coating problem. D, print medium surface, good light. E, the paper use the reverse side.


14, irregular vertical black spots: A, caused by sealing blade deformation waste powder scattered. B, due to the carbon powder accumulation on the magnetic roller, too much powder leakage caused.


15, color light: is associated with A number of factors: A, carbon powder itself problem B, drum, with magnetic roller problems. Knife aging D C, the powder, magnetic roller wear E, drum to life F, environment humidity, high or medium moisture absorption.


16, bottom ash, bottom ash refers to the blank area of the printing of mist toner, also related to many factors: scraper, charging roller dirty B aging problem C, carbon powder, drum fatigue, to the life of D, environment temperature and drying adverse F E, print medium, the charging roller wear.


17, fixing rickety: means the reactionaries text or image on the printed product is off.


the reasons are: A, fixing temperature of the carbon powder softening point higher than machine B, too thick or too light on the surface of printing media.
Service-based companies as Colorunion Industry Limited are increasingly becoming more popular internationally.
Colorunion Industry Limited is one of leading oem toner cartridge custom cartridge distributors. You can order , and accessories for your need. Meeting your business need is always our top priority. Any of your enquiry is warmly welcomed.
Colorunion Industry Limited has enlarged the scope of services, which can fully please customers' demands.
Time is one of the biggest challenges cited by manufacturing custom cartridge.
In conjunction with retraining and upskilling efforts, Colorunion Industry Limited’s workers should focus on growing unique human skills that high-tech machines are unable to replicate, such as strategic and abstract thinking, complex communications, creativity and leadership competencies.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...